For now, there is no cure that can really cure Alzheimer’s, but researchers have made progress to detect this disease early. With this, the patient makes it possible to seek treatment that can help to slow the effects of Alzheimer’s, or at least give them a longer time to prepare for the inevitable.
As Engadget reports, researchers from the University of Bari in Italy, have recently made some impressive progress to detect the disease early. They developed AI or artificial intelligence, where it seems that they have successfully developed an algorithm capable of detecting Alzheimer’s as early as 10 years before symptoms can appear.
What the researchers did was that they had given AI 67 MRI scans of 38 Alzheimer’s patients, and an additional 29 of those who did not have the disease. The scans are then subdivided into small areas and AI is then used to analyze the nerve connectivity between them.
Then, the researchers placed the AI to test by scanning the brain of 148 subjects, of whom 48 had Alzheimer’s, while 48 others had mild cognitive impairment that could later lead to Alzheimer’s.
Artificial intelligence is capable of diagnosing 86% of Alzheimer’s patients and 84% of mild cognitive impairment. but the system is still far from the word ready to use normally due to the limited number of scans being tested. But at least so far the development shows the expectation. Hopefully the above information is useful for you. thanks.
Should your water pressure be lower than normal but all seems okay with your faucets and other internal hardware, the issue may be elsewhere. By this, we mean beyond the internal plumbing of the home or business. There could be damaged in the line from the structure which leads to the town’s water lines. How can you detect this on your own befoe spending hundreds or thousands of dollars? Through a bit of detective work.
The very first thing you may want to do is contact the property owner or the city to determine how old the water pipes are which run from the building to the main feed. Some structures may have been rebuilt several times but never had the lines replaced due to budget or a survey which determined they were in good shape.
Next, determine where the shutoffs are on the property. This is not the valve which stops water flowing in the structure. Rather, this is the area where contractors would go in to halt water coming in from the city. You’ll need to find this if you can determine where the leak is. This may be as easy as walking around the property to see if there are any areas which are wetter than others. This may be feasible if the leak is strong enough as most pipes are buried at least three feet into the ground.
If this doesn’t work, check to see if water is properly flowing to the structure’s meter. If running above what is normally seen this can mean a leak between the meter and the supply. You can verify numbers with the local utility to see if there has been an increase in gallons used.
Should a leak be discovered you’ll probably need to speak with a contractor to determine what needs to be dug and replaced. When speaking with them ask questions about the products they use to test and install. If they speak of bullet gauges and cross rollers — deflection technology which is purchased from places like Hurco Technologies, they may be ones to consider.
Regardless of what needs to be done, do your research first to avoid losing money and having to make another repair. Click here for additional information.